Rod Riggers Scorecard
Click HERE to return to the Fishing Gear scorecard summary.
| Date | Problem | Solution |
 Reliable Aluminum rodriggersIn Service: 12-AUG-2001 |
||
| Oct. 12, 2001 | These rodriggers come with vinyl liner sleeves in the rod tub. The liners are not glued in place, and tend to come out. They also make the inner diameter a little too small to accomodate some of our rods with hypalon grips. | Removed the liners. No problems since. |
| June 27, 2002 | These rodriggers only have one set of notches in the stand, so it only locks in the correct position in rod holders that have a pin pointing fore-and-aft. Does not work in the factory-installed stern rod holders | Cut a new set of notches in the stand, at right angles to the other set. Works fine now. |
Windline SS Rodriggers
|
||
| Aug. 12, 2001 | The Windline rod tubes are too small to take the hypalon grips on most of our rods | Replaced with the Reliable rodriggers, which have a larger diameter rod tube. |
